VIEWERS COMMENTS
"Our experience with Optinet's
Sizing Tools has been very productive. We designed a 6 axis machine, with
settling time specification. Our system parameters included bearing type,
moving mass, location of center of gravity and bearings. With Sizing Tools
we were able to quickly get a settling time estimate and adjust our design
parameters to meet the requirements."
Yefim Khariton Sr. Design Engineer, Parker Bayside
______________________________________________________________
" Yesterday we got the access to the machine to perform the required testing. I need a few days to send you the results in a readable form, but what I can say right now, that the results look fantastic! First you hear the results by your ears in the meaning that you don't hear the moving noise when the Luenberg is active. Data collection and analyses show great reduction of the noise components both in the velocity signal and in the command. So in any case many thanks to you and friends because as minimum we have an added value. Regarding the WizAlg – it is really great. Only 7 minutes it has taken me to implement the Luenberg in the existing algorithm with the WizAlg. Thank you very much, I hope we will test and implement many other solutions."
Max Sakhartov, Ph.D. Mega-F CEO
______________________________________________________
"Thank you for providing the 3D Precision
Analysis Sizing Tool on your website. It has been extremely useful in
helping me determine accuracy and repeatability at point-of-interest for
numerous multi-axis positioning applications. Most recently, as a result
of utilizing the data from your software in a proposal my company has won
a contract with a large target account to provide a high precision
positioner for an aerospace manufacturing application.
Thanks again for providing your excellent
software! "
Best Regards,
Kris Tuthill
Applications Engineer
Parker Bayside
________________________________________________________
Subject: RE: BD 60K print - thank you
"It was a huge accomplishment and you were a very big part of it's success. I certainly hope we can build on that."
Regards,
Roy Lamothe Business Unit Manager
_____________________________________________________________
"For the Ultimate Patent Pending Gantry contact us
Dear Dr. E,
I recently discovered your website, from an advertisement in Machine Design magazine. Congratulations and thanks for assembling a very useful set of calculators! I'm not in the gantry market or business, but your statement piqued my intellectual curiosity. I admit it...I'm an information junkie! So... what is the Ultimate Gantry? "
Best Regards,
Dan Sutula Design Engineer,
Ensign-Bickford Aerospace & Defense ________________________________________________
Hello, Your site is great. Regards, Valintino Guxxi
______________________________________________________________
04/28/2008 04:43 PM
Hi Bo,
We successfully xxxxxxx our first 60K glass last Friday night.
Thank you to the entire team at Parker Bayside.
We could not have gotten this far without all your hard work and dedication.
There is a lot left to finish, but it is great to see a completion of an important milestone.
Best Regards,
Ben
XY Motion:
– Y speed = xxxxxxxx
– X increments = xxxxxxxx
Ben Johnston
AKT, Applied Materials
_______________________________________________________________